Diamonds are known to be one of the most expensive gemstones on Earth. Valued for its luster, strength, durability, and ability to last lifetimes and generations, it is no wonder that people often go for the gemstone for their choice of accessories. But if you are not familiar with the components, detailing, Wholesale Jewelry, and structure of a diamond, you might find yourself at the wrong end of a purchase you thought was worth it. real or Fake
Diamond has so many lookalikes and substitutes, from cubic zirconia to moissanite. You might be led to believe that what you intend to purchase is the real deal, whereas it is only a substitute. How then do you know if your diamond is real or a phony? This guide will show you several ways to confirm if it is an actual diamond or a rip-off. real or Fake
How to tell if Diamond is real or Fake?
Diamond tester
Using a diamond tester is bound to give you an accurate answer. Diamond testers are used by novice and professional jewelers alike. And you don’t have to worry about spending a lot of money to get one. We have the relatively cheap and the higher-end tester. You can get the relatively cheap one on Amazon for as low as $16.99. real or Fake
Heat test
One of the diamond’s most attractive characteristics is strength. Being one of the most complex substances on Earth means that it will not melt unless a lot of heat, up to 7,280 Fahrenheit. That is why this method is sure to work. All you need to do is have a container half-filled with water. Then, hold the diamond over the container with a set of pliers, thongs, Wholesale Silver Jewelry, or whatever is convenient. Heat the gemstones for 40 seconds and drop them into the container. If it shatters, then is it a phony. If it does not, then it is a genuine diamond. real or Fake
The fake diamond will shatter because the rapid expansion and contraction will cause its constituents to crack and break. The covalent bonds of real diamond are strong, making its melting and boiling point very high, thus resistant to the heat of the fire and cooling of the water. The heat test is not something you should try if you know you might not be able to deal with the outcome should it turn out to be faux. real or Fake
The Dot test
Lay a paper down and make a single dot on it. Place the flat end of the diamond precisely on the dot. Then, look through the side facing up to see if the dot you made is visible. If it is, then the stone is fake. If it is not visible through the side facing up, then it is a real one. This test works because the light entering the stone is refracted, which means that you should not see a circular reflection or the dot in the diamond. real or Fake
Water test
To carry out this test, you will need a half-empty glass of water. Then, gently lower the gemstone into the glass. The diamond should sink to the bottom. If the stone floats to the top or doesn’t quite get to the bottom, then you might have a phony. This is because diamonds have a high density. However, this test is not 100% fail-safe as heavy cubic zirconia, or moissanite will also sink to the bottom. real or Fake
The Scratch test
It is common knowledge that the only thing capable of scratching, messing up, or even cutting a diamond is another diamond. This brings us to the scratch test. Now, Jewelry manufacturer, this test cannot be done if you know you will not buy the jewelry. If it is yours, go ahead and try this out. Pick up stainless steel or ceramic product and try to scratch the surface of the diamond. real or Fake
If it scratches, then it is not the real thing. If it stays in its true state, then you have a real diamond in your hands. Performing this test is a risk, though, because if your jewelry turns out to be made of something other than the actual stone, then you have left a mark on it. real or Fake
The Fog test
Hold the diamond between your index finger and thumb, bring it close to your mouth, and breathe on it. A cloud of fog should appear on the surface of the gemstone. If the fog evaporates immediately, the stone is real. If it takes a few seconds or more, then you have a substitute. A real diamond will not fog up easily because condensation does not stick to the surface. real or Fake
The flashlight test
Much like the dot test where light is refracted, you can carry out a test to know if your diamond is real with just a flashlight and a piece of newspaper or a page in your book. Before you do this, ensure that you have bright lighting to dispel shadows. Place the flat side of the stone on the paper and see if you can make out the letters. If it is a real diamond, you should not be able to see clearly or make out the words on the paper. This test is effective for determining the authenticity of loose diamonds. real or Fake
Checking the setting
Diamond jewelry often comes with marks or tags that are engraved on them. This will tell you the type of metal used in the making of that jewelry. A natural diamond will only be set in metals like white gold, yellow gold, silver, and platinum. For gold, any marking less than 10k is considered inferior. Platinum markings are numbers like 585, 770, 900, and 950. real or Fake
These DIY tests are ways to be sure that what you are getting isn’t a rip-off. Getting your money’s worth is a top priority. But the most efficient way to be sure that what you have is a real diamond is to take is to professional jewelers and reputable jewelry stores like Tiffany & Co for evaluation. They have high-end thermal conductivity probes, fine-tuned scales, and other instruments combined with years of training and experience to give you the best answer. real or Fake
